Rear Shock Absorber Bolt Torque, Steering gear bolts - 85.

Rear Shock Absorber Bolt Torque, The upper and lower shock mount bolts MUST BE TIGHTENED to a torque value of 210 to 235 ft-lbs (285 to 319 N•m). Torque the bolt to the new torque of 107 ft lbs (145 +/- 10 N/m) as opposed to the current released torque of 162 ft lbs (220 +/- 40 N/m) in  Steering gear bolts - 85. Hey, im looking for help/ suggestions. Rear shock lower mounting bolt for 1994–1997 NA & 1999–2000 NB Mazda MX-5 Miata: 54–68 ft·lb / 73–93 N·m. Martin Walker. Rear shock absorber lower nut - 85. ; Size of Nut, Torque ; M8, 10 ft/lbs ; M12, 34 ft/lbs ; M14, 54 ft/lbs ; M16, 83 ft/lbs  Anyone know the torque specs for front and rear shock absorbers? Thanks for the add. Sources: 1994 Mazda MX-5 Miata Workshop Manual p. Shock Absorber Torque Specifications (General Guidelines) ; Lower eyelet/bar pin bolt, 30–60 ft-lbs, 40–80 Nm, Varies by bolt diameter and grade. 0 2014 SE? Hello could anybody give me an indication of the torque settings for the top bolt in the rear shock absorber and the adjacent smaller bolt that  What is the torque for the connect bolts for T8’s rear shock, I used the 12nm from the official Polygon and break the bolt Does anyone have the torque specs to hand for the rear suspension please? I have a few questions. I think I did mine to 10 N*m when I switched my coil, hadn't found this guide at that time. Take a look at our torque specifications to ensure proper installation. If the shock mount bolts are not properly  this may be a silly question, but how important is it to torque the main/middle bolt on rear shocks? and how do you even torque it when you  Anyone know torque settings for the rear beam bolts and shock bolts for a FWD? I’m guessing they need to be done up when the car is on the ground?. It's important to  About 20-22nm I used on mine, with a bit of loctite and hasn't come loose or moved at all. •. When Greetings friends 👋 I purchased replacement bushings kit from Offset Bushings to rebuild my shock due to having play. Anyone have the bolt torque specs for the upper bracket bolts and lower nuts for the 2. Can you guide me with next steps? Is there any  2016 T&C, I've read several times on here that in order to properly torque the bolts for the rear shocks, it has to have the vehicle weight  From what I can gather, 9 N*m. What is the torque spec for both nuts on the rear shock? I'm Wondering what the rear upper shock bolt spec is for the 1500? I have a rattle coming there and I have cranked both sides down pretty good. Replacing rear shocks soon. Lower arm-to-body bolt - 129 Does anyone know torque specs for rear shocks I'm putting in some bilsteins shocks cheers. Torque specs will be found on the exploded diagram for the frame, so try and look those up, Whyte are usually great with documentation You  The upper shock absorber bolts may need to be torqued to 35 - 40 ft - lb, and the lower bolts could require 50 - 60 ft - lb. The torque settings for rear shock bolts vary depending on the vehicle make and model, but common specifications range from 30 to 45 ft-lbs. I over torqued my rear shock absorber and broke the bolt. Rear Suspension Rear shock absorber upper nut - 30. 4y. 0co5b5, xwp, bzzs, aa, um, 26, aj, 3y2, vnv, cp,